A dog bed insert replacement brings your old, lumpy bed back to like-new condition, so there’s no need to buy a new bed. We offer standard and custom sizes, for our beds or any other brand's round bolster bed.
1. Check what's wrong
If the fill is just a little flat, add replacement stuffing. If it's clumped, torn, or won't fluff back up after washing, replace the insert.
2. Measure the old insert
Take the old insert out of the cover, empty out the stuffing, and lay it flat. Measure length and width in inches. Don't measure it stuffed. A full tube measures short and you'll order the wrong size. On a round bolster bed, measure the ring and the center pillow separately.
3. Order the right size
Round bolster beds use two inserts: a bolster ring insert for the raised rim and a rectangle pillow insert for the center. We make both in XS to XL, or custom sizes for other brands' beds. Between sizes? Email your measurements to admin@sitstayforever.com.
4. Put the new insert in the cover
Open the cover's zipper all the way. Take the ring by one end and feed it through the opening. Work the tube so that it is half way through with equal amounts of tube on either side. Slowly hold the zipper together and zip 2-5" sections. Keep working your way around the ring until the end. This can be a little tedious, but with a little determination you will be able to figure it out. Keep pushing the pillow into its cover and zip it closed. Here's how it's done on our beds: watch our owner Steve and his shop mate Yogi insert a ring into one of our cotton covers.
Shop all replacement dog bed inserts, handmade in Westbrook, Maine.